J.P. de Souza, D.K. Sadana, et al.
Symposium on Process Physics and Modeling in Semiconductor Technology 1990
When a high dose of As is implanted (e.g., 25 keV, 3×1015 cm-2) into B-doped Si and the sample is subsequently annealed at 900°C/5 min, pronounced segregation of the B into the implanted region occurs. This creates a B-depleted region beyond the As profile. It is demonstrated that the B segregation is driven primarily by the implantation induced damage rather than by As-B chemical and/or by electric field effects. The B segregation is nearly complete after a relatively low temperature (≲600°C/30 min) anneal. Two-dimensional device simulations show that the B depletion observed here can account for ≅50 mV threshold voltage roll off (at a drain bias of 0.1 V) in a Si metal-oxide-semiconductor field effect transistor of 0.2 μm gate length.
J.P. de Souza, D.K. Sadana, et al.
Symposium on Process Physics and Modeling in Semiconductor Technology 1990
G.M. Cohen, D.K. Sadana
MRS Proceedings 2001
J.C.P. Chang, K.L. Kavanagh, et al.
Applied Physics Letters
C.C.-H. Hsu, B.S. Wu, et al.
SSDM 1992