The dawn of 22nm era: Design and CAD challenges
Ruchir Puri, David S. Kung
VLSID/Embedded 2010
The high frequency thermal noise sets the lower limit of the detectable signals in the receiver RF front-end systems. Hence it is very important that the models for thermal noise should be more accurate and physical. In this paper, we model thermal noise with BSIMSOI and PSPSOI models and compare it with the hardware data. The comparison is done for two types of FET gate-oxide NFET(5.2 nm) and thin gate-oxide NFET(3.2 nm). The hardware correlation between the PSPSOI and BSIMSOI models are compared and the PSPSOI model is found to model the hardware data more accurately. The noise performance between the thin oxide and thick oxide NFETs are compared and the thin oxide FET has been found to have a better noise performance. © 2010 IEEE.
Ruchir Puri, David S. Kung
VLSID/Embedded 2010
Saurabh Sirohi, Sourabh Khandelwal
ICSICT 2010
Rajiv Joshi, Keunwoo Kim, et al.
VLSID/Embedded 2010
Shyam Parthasarathy, Amit Trivedi, et al.
VLSID/Embedded 2010